Mechanical brewing system for even and gentle pre-infusion (Pre-infusion, also known as pre-brewing, is a preliminary run before the espresso powder is extracted. The powder in the portafilter is evenly wetted without pressure to prevent water channels in the dry powder during extraction. This improves the taste of the espresso).
Design
Excellently suited for use in professional kitchens
Illuminated control panel
Programmable or manual dosage
Automatic cleaning of the brewing groups
Heated cup shelf
Elevated brew groups for larger cups up to 140 mm cm high
Modern design
Easy to use
Easy to clean
Quality
Made of high quality stainless steel
Special high-gloss finish
High-quality heating elements
Highly robust and durable
Heat insulated, ergonomic handles
Connection
Power: 2,65 kW
Electrical connection: 1N/PE / 230V / 50 Hz
Device is delivered without plug!
Dimensions
Outer dimensions W x D x H: 475 mm x 563 mm x 530 mm
Please note:
Please open the steam nozzles at the initial start-up until steam comes out of the nozzles. This step ensures that the boiler is fully vented
We recommend regular descaling of the appliance to ensure flawless operation.
If you have connected a descaler upstream, please note that the cartridge must be cleaned after approx. 1.500 - 2.000 liters of water flow must be regenerated. The actual maximum flow rate depends on the hardness of the water.
Detailed instructions can be found under the tabs 'Download' and 'Video'.
This appliance requires a fixed water connection!
Standards
Manufactured in accordance with relevant hygiene and safety standards
CE marking as proof of conformity with EU regulatory standards
Materials comply with European food safety standards
TÜV Saarland award
In an official analysis by TÜV Saarland Germany, we were awarded top marks for price/performance and customer satisfaction. Our employees do their best every day to offer you an excellent shopping experience.
* These certificates have been awarded on the basis of a representative customer satisfaction survey in Germany
Mechanical brewing system for even and gentle pre-infusion (Pre-infusion, also known as pre-brewing, is a preliminary run before the espresso powder is extracted. The powder in the portafilter is evenly wetted without pressure to prevent water channels in the dry powder during extraction. This improves the taste of the espresso).
Design
Excellently suited for use in professional kitchens
Illuminated control panel
Programmable or manual dosage
Automatic cleaning of the brewing groups
Heated cup shelf
Elevated brew groups for larger cups up to 140 mm cm high
Modern design
Easy to use
Easy to clean
Quality
Made of high quality stainless steel
Special high-gloss finish
High-quality heating elements
Highly robust and durable
Heat insulated, ergonomic handles
Connection
Power: 2,65 kW
Electrical connection: 1N/PE / 230V / 50 Hz
Device is delivered without plug!
Dimensions
Outer dimensions W x D x H: 475 mm x 563 mm x 530 mm
Please note:
Please open the steam nozzles at the initial start-up until steam comes out of the nozzles. This step ensures that the boiler is fully vented
We recommend regular descaling of the appliance to ensure flawless operation.
If you have connected a descaler upstream, please note that the cartridge must be cleaned after approx. 1.500 - 2.000 liters of water flow must be regenerated. The actual maximum flow rate depends on the hardness of the water.
Detailed instructions can be found under the tabs 'Download' and 'Video'.
This appliance requires a fixed water connection!
Standards
Manufactured in accordance with relevant hygiene and safety standards
CE marking as proof of conformity with EU regulatory standards
Materials comply with European food safety standards